Insaver HO Topper LED II 225 RO 25W NW
INSAVER HO TOPPER LED II 225
Caratteristiche prodotto
- IP44 from the front round LED downlight with polycarbonate diffuser with a white bezel.Polycarbonate diffuser with a white bezel. Shallow recess depth (<65mm). Available in 12, 15, 21 & 25W in 150mm, 175mm, 205mm & 225mm cut out sizes. Perfect for up to 2x26W CFL replacement. Includes loop-in loop-out facility for quick installation.
Panoramica del prodotto
Panoramica del prodotto | |
---|---|
Nome prodotto | Insaver HO Topper LED II 225 RO 25W NW |
Tecnologia | LED |
Cap/Base | N/A |
Housing | Alluminio |
Montaggio | Ceiling recessed mounting |
Environment | Interior |
General application | Strutture alberghiere |
ETIM Class | EC001744 |
E-number Svezia | 7465634 |
Fixture luminous flux (lm) | 2400 |
Luminaire efficacy (lm/W) | 104 |
L.O.R. (%) | 100 |
Temperatura di colore (K) | 4000 |
Colore della luce | Neutral White |
CRI (Ra) | 80 |
Consistenza colore (SDCM) | SDCM3 |
Beam Angle (°) | 74 |
Glare control | < 24 |
Gruppo di rischio fotobiologico | RG0 |
Potenza totale (W) | 25 |
Electrical protection | Classe II |
Tipologia reattore | LED driver constant current |
Dimmable | No |
Dimming method | N/A |
LED Flickering Rate | Ultra low (5% or less) |
Colore corpo lampada | RAL 9003 - Signal white |
IP rating | IP44/20 |
IK rating | IK07 |
Product EAN number | 8711971339496 |
Garanzia | 5 years |
Dati di prodotto
Dati generali | |
---|---|
Nome prodotto | Insaver HO Topper LED II 225 RO 25W NW |
Tecnologia | LED |
Cap/Base | N/A |
Housing | Alluminio |
Montaggio | Ceiling recessed mounting |
Environment | Interior |
General application | Strutture alberghiere |
Operating temperature range (°C) | -10°C...+25°C |
Performance ambient temperature Tq (°C) | 25 |
ETIM Class | EC001744 |
E-number Svezia | 7465634 |
Garanzia | 5 years |
Dati ottici | |
---|---|
Fixture luminous flux (lm) | 2400 |
Luminaire efficacy (lm/W) | 104 |
L.O.R. (%) | 100 |
Temperatura di colore (K) | 4000 |
Colore della luce | Neutral White |
CRI (Ra) | 80 |
Consistenza colore (SDCM) | SDCM3 |
Cromaticità regolabile | No |
Beam Angle (°) | 74 |
Distribution type | Simmetrico |
Glare control | < 24 |
Gruppo di rischio fotobiologico | RG0 |
Dati elettrici | |
---|---|
Potenza totale (W) | 25 |
Primary Supply/Product voltage - min (V) | 220 |
Primary Supply/Product voltage - max (V) | 240 |
Lamp power factor | 0.9 |
THD (at 230 V, 50 Hz, full load, at 100% dimming level) ≤ xx.x % | 20 |
Electrical protection | Classe II |
Tipologia reattore | LED driver constant current |
Dimmable | No |
Dimming method | N/A |
Drive current (mA) | 630 |
Corrente di spunto (A) | 6.44 |
Durata picco di corrente (µs) | 830 |
Glow Wire Test (°C) | 850 |
Energy Efficiency Class (A->G) of contained light source | E |
Nominal Frequency (Hz) | 50/60Hz |
LED Flickering Rate | Ultra low (5% or less) |
Quantità max. apparecchi per interruttore 10A tipo C | 12 |
Max. products per 13A C Breaker | 16 |
Quantità max. apparecchi per interruttore 16A tipo C | 20 |
Max. products per 20A C Breaker | 25 |
Dati vita utile | |
---|---|
Vita utile nominale - L70 B50 | 100000 |
Vita utile nominale - L80 B20 | 74000 |
Vita utile nominale - L90 B10 | 34000 |
Dati dimensionali | |
---|---|
Colore corpo lampada | RAL 9003 - Signal white |
IP rating | IP44/20 |
IK rating | IK07 |
Diffuser finish | Opalino |
Diffuser material | PC Polycarbonate |
Finitura del riflettore | High-gloss |
Nominal Product Height (mm) | 65 |
Nominal Product Diameter (mm) | 240 |
Cutout Dimensions (W x L in mm or Diameter in mm) | 225 |
Peso (Kg) | 0.845 |
Recessed Depth (mm) | 150 |
Dati di imballo | |
---|---|
Product EAN number | 8711971339496 |
Lunghezza imballo singolo (mm) | 27.2 |
Larghezza imballo singolo (cm) | 27.3 |
Packaging single depth (cm) | 8.0 |
DUN14 (outer) | 18711971339493 |
Quantità per imballo esterno | 12 |
Packaging outer length / height (cm) | 56.6 |
Packaging outer width (cm) | 56.7 |
Packaging outer depth (cm) | 28.0 |
Dati di sicurezza | |
---|---|
Temperatura ottimale di utilizzo (°C) | -10-25 |